How to Install a Ghost Immobiliser
A ghost immobiliser protects your vehicle from key cloning and hacking. It works by stopping the vehicle's engine from starting until it is activated using a PIN code, which can be up to 20 characters long.
It is not detected by thieves, who are unlikely to think about this additional layer of security. Some systems have an app that allows the owner to disarm their immobiliser in the event of forgetting their PIN or utilize the service/valet mode.
Connecting to the vehicle's CAN bus
The Ghost 2 Immobiliser is a cutting-edge security system, can be integrated directly into the ECU of your vehicle. It is a subtle security barrier against thieves. It is extremely efficient and user-friendly and is a great addition to your vehicle's security arsenal. However, like any anti-theft device, it is not foolproof and requires regular maintenance to ensure proper operation. This guide will help you make the most of your Ghost 2 immobiliser.
CAN (Controller Area Network) is a reliable serial network that allows microcontrollers to communicate with one another in short distances, without the necessity of a central control unit. It is designed to allow multiplexing of electrical wiring inside vehicles to save on copper and offers a range of advantages, including low cost and easy use.
In most modern cars In modern cars, the CAN protocol is used to communicate with various systems, such as the engine management system (EMS) steering module, transmission controller air conditioning controls, and more. It also transmits sensor data, such as speed sensors and inputs, to control the various functions of the car. The CAN bus is able to monitor the condition of these various components and can prevent the vehicle from starting if it's in an unsafe condition.
It's crucial to understand how the CAN bus functions and how it is secured. It's possible to add new features to a vehicle using CAN bus, however it is important to protect it from attacks from hackers and other dangers. The best way to accomplish this is to install a firewall and monitoring your CAN bus through software.
Ghost2's control unit is concealed in the car's wiring harness or dashboard, removing the possibility of a thief physically altering it. It is also impossible to reset a PIN code or emergency code without having access to the vehicle.
You can enable Transport Mode if you need to sell your car to valet parking, service or for any other reason. This feature disables the Ghost immobiliser's ignition and keyfob functions, and will only reactivate when the vehicle is speeding at 31 mph for a period of 15 minutes.
How to create a PIN code
The Ghost immobiliser is a robust security system that protects your vehicle from thieves. The cutting-edge technology uses the PIN code to disable the engine and stop it from running without the correct code or a valid fob/mobile device. The system's sleek design makes it unnoticeable, and offers unrivaled protection against theft. Moreover the system is TASSA tested and could provide significant savings on insurance premiums for cars.
During the installation, Ghost enters a "learning mode" to record the sequences of buttons that are pressed to create unique pin codes. Once the pin code is created the installer will guide you through the steps to activate the system. Once activated, the Ghost system will disable the motor that starts your vehicle until a valid pin code is entered or the vehicle is switched to transport mode. This makes it difficult for thieves or cloners to hack into or replicate your starter system.
Installing a Ghost immobiliser is straightforward, but it is important to follow the precise instructions in the user's manual to ensure that it operates properly. Basic hand tools can assist in making accurate connections and a multimeter can aid in checking the electrical parameters. Insulation tape, heat shrink tubing and cable ties are a good option to shield wires from damage. Test visit the following post on regular basis to identify any issues that could be.
After the installation is completed it is crucial to make a final test of the system prior to turning on the ignition in your vehicle. The Ghost immobiliser will be able to rearm itself after 3 to 30 seconds, depending on your car's model. The system also has an option for Service/Valet that allows you to temporarily disable the system while servicing your vehicle or valet parking.
The immobiliser should be concealed in an inconspicuous location under the dashboard or steering wheel. Make use of a small piece of duct tape or paint on the wires CAN H and L to make them easier to locate when testing. In addition the CAN H and CAN L wires must be connected to a source of power that has continuous 12V. It is crucial to verify the connections after testing, as an the incorrect identification of these wires may cause the system malfunction.
Invoking the system
A ghost immobiliser blocks your vehicle from starting unless you press a sequence of buttons inside the car, usually the steering wheel, door panel or central console. The sequence can be altered by the user if needed. Once the system is activated it is in no way able to be removed by thieves, making it a good choice for anyone who wants to protect their vehicle from theft.
The device is not designed to be detectable by modern diagnostic tools and code-grabbing techniques. It also doesn't broadcast radio signals, which makes it even harder for thieves to detect the device.
If the device is located, it will stop the engine from starting. It will also sound an alarm to scare thieves away. The device can be used to track a car's location which can help police recover the vehicle in case it is stolen.
If you're interested in a ghost-immobiliser call the experts at Car Specalist Customs to get a quote and discuss your options. We are certified to install ghost immobilisers for your vehicle. We will ensure that it is concealed in an area that is hard to reach. We can also provide additional security measures such as a wheel lock and kill switch to keep your car safe from thieves.
Disarming the system
If you have an Ghost immobiliser that is fitted to your vehicle, it's important to know how to disarm it. This will aid you in the event that you lock your keys inside the car or when your battery fails. The system is based on an individual PIN code that only you know, which means the immobiliser will not start your vehicle without entering this code. Pressing the combination buttons on the dashboard or steering wheel is the most efficient way to enter your code. ghost car immobiliser is much easier than using a key fob. It also keeps others from copying the remote.
Ghost2 is not intrusive unlike some aftermarket immobilisers that require cutting wires for installation. It also connects to the CAN bus system of your vehicle to operate. Its most distinctive feature is that it shuts off the engine, without affecting normal functions of the vehicle. This makes it very difficult for thieves to use signal boosters or clone car keys. Furthermore, it doesn't emit radio frequencies, so thieves aren't able to detect the system.
The Ghost system comes with a Transport Mode which allows you to temporarily disable security for certain situations such as transportation or service. This feature is great when you're lending your vehicle to someone else, without sharing your PIN code or if your vehicle needs to be kept secure when you drive it. To activate the Transport Mode, press the service button 5 times in a matter of 2 seconds. The Ghost system will confirm activation by giving 5 indication signals.
Keep the emergency code inside your vehicle in a secure place. In the event that you find yourself locked out of your vehicle, contact the technician or company who installed the system and they will provide you with the code. If you are unable to reach them, then you can call an authorized dealer. However, this could involve verification procedures, and you may be charged additional fees.
This system isn't just practical, but it can also help protect your vehicle from theft and reduce the cost of insurance. Many insurance companies offer reduced costs or financial incentives for those who install this anti-theft system.